Click here to close now.



Welcome!

Open Source Cloud Authors: Pat Romanski, Liz McMillan, Elizabeth White, Ed Featherston, Roger Strukhoff

News Feed Item

MSC Embedded Announces New Qseven Module With Quad-Core ARM Cortex(TM)-A9

SAN BRUNO, CA -- (Marketwire) -- 11/29/12 -- MSC Embedded Inc., manufacturer of highly integrated standard board level products and customer-specific boards and systems, today introduced the new MSC Q7-IMX6, a low power, high performance embedded module with strong graphics capabilities. The module is offered with three different processor versions and may be used for single-core, dual-core or even quad-core computing. This multi-mode capability gives new meaning to the often quoted concept of "scalable performance" for embedded boards.

The new Qseven module MSC Q7-IMX6 uses the ARM processor Freescale i.MX6 which contains a Cortex-A9 RISC CPU with one, two or even four cores. These processors are fully compatible with each other, so they can be alternatively soldered on the same boards. Even though the processor consumes very little power, it provides high computing performance at up to 1.2 GHz clock rates, accompanied by powerful graphics capabilities. All models except the single-core version provide the Freescale Triple Play graphics architecture which consists of decoder hardware for (dual-stream) 3D videos up to Full-HD resolution (1080p). Up to four shaders with a combined power of up to 200MT/s achieve excellent 3D graphics results, a separate 2D BLT engine accelerates user interface speeds, and an additional 2D OpenVG engine drives vector-based graphics.

The module provides two banks of DDR3 DRAMs supporting between 512MB and 4GB of memory. Additionally, a 128MB NOR Flash device stores the boot loader while an optional NAND Flash memory (up to 8GB) can be used as a Flash Disk. On top of this, a SATA-II interface up to 3Gbps is available to support external data and program storage.

Among the Qseven interface set there are two USB 2.0 interfaces of which one may be host or client. An optionally populated hub device increases the number of USB interfaces to eight, so that all USB ports in the Qseven standard can be supported. PCI-Express x1 is provided as well as Gigabit Ethernet and AC'97 audio, along with busses such as CAN, SMBus, I2C and SPI. The HDMI V1.4 graphics output supports resolutions up to 1920 x 1200 (WUXGA) as well as dual-channel LVDS with 18 or 24 bits. These LVDS channels may alternatively be used as two different single-channel LVDS outputs for resolutions up to 1280 x 720 each. The internal graphics controller of the i.MX6 supports parallel operation of three different independent monitors so that each attachable screen can display different content.

MSC has provided a feature connector for interfaces not contained in the signal scheme of the Qseven connector. It can be accessed on the module and provides an additional UART next to SPI, MIPI-CSI and a BT.656 Camera interface.

Said Wolfgang Eisenbarth, VP Marketing, Embedded Computer Technology, MSC Vertriebs GmbH, "Despite its high computing and graphics performance and the multitude of functions, the MSC Q7-IMX6 consumes only 5 Watts of power. Moreover, all module variants will be available in the full industrial temperature rating, and as part of our embedded product portfolio, MSC will keep the module available for at least seven years."

The MSC Q7-IMX6 will be accompanied by driver and BSP support for Linux and Windows Embedded Compact 7 with further operating systems to follow. MSC can provide a compact baseboard (MSC Q7-MB-EP4) for evaluation and test of the module. The Qseven Reference Platform (MSC Q7-MB-RP2) is already available in the ATX format and represents an ideal development environment. At the time of sample availability, MSC will also offer ready-to-run starter kits for the MSC Q7-IMX6.

The new Qseven module covers a broad band of computing performance resulting from the choice of available CPU devices. Therefore, it may be used for a wide range of applications. For example, it is well suited for HMI applications (Human-Machine-Interfaces) in which it is responsible for the graphical representation of the human user interface. Similar applications can be found in medical systems, control stations in home automation or display systems in POS (Point of Sales). Due to the high graphics performance, the module can also be used in applications from Point-of-Information (POI) up to large "Digital Signage" displays. Since the module will also be available in the extended temperature range, it is well suited for all kinds of industrial applications, and due to its low power consumption it can also be used for portable, battery-powered applications.

Pricing and Availability
First samples will become available in January, 2013. The quad-core version will be priced around $180 in medium volumes.

MSC Embedded Inc.
MSC Embedded Inc. is a manufacturer of board-level products and customer specific industrial embedded computers. Products include COM Express ™, Qseven and ETX ® as well as products that interface to COM modules like carrier boards, I/O technologies for displays or other process interfaces. MSC Embedded also offers custom BIOS adaptation, BSP and device drivers for all its products to OEM customers worldwide. The company's headquarters is based in San Bruno, CA and Stutensee, Germany. For more information, visit www.mscembedded.com

Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=2167793

Press Contacts:

Michael Miller
Direct: (650) 616 4068
Fax: (650) 616 4001
Email: Email Contact
www.mscembedded.com

Andrea Vedanayagam
Veda Communications
(408) 656-4494
Email Contact

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

@ThingsExpo Stories
Cloud computing is being adopted in one form or another by 94% of enterprises today. Tens of billions of new devices are being connected to The Internet of Things. And Big Data is driving this bus. An exponential increase is expected in the amount of information being processed, managed, analyzed, and acted upon by enterprise IT. This amazing is not part of some distant future - it is happening today. One report shows a 650% increase in enterprise data by 2020. Other estimates are even higher....
SYS-CON Events announced today that Bsquare has been named “Silver Sponsor” of SYS-CON's @ThingsExpo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. For more than two decades, Bsquare has helped its customers extract business value from a broad array of physical assets by making them intelligent, connecting them, and using the data they generate to optimize business processes.
A strange thing is happening along the way to the Internet of Things, namely far too many devices to work with and manage. It has become clear that we'll need much higher efficiency user experiences that can allow us to more easily and scalably work with the thousands of devices that will soon be in each of our lives. Enter the conversational interface revolution, combining bots we can literally talk with, gesture to, and even direct with our thoughts, with embedded artificial intelligence, wh...
Internet of @ThingsExpo, taking place November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 19th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The Internet of Things (IoT) is the most profound change in personal and enterprise IT since the creation of the Worldwide Web more than 20 years ago. All major researchers estimate there will be tens of billions devices - comp...
19th Cloud Expo, taking place November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, will feature technical sessions from a rock star conference faculty and the leading industry players in the world. Cloud computing is now being embraced by a majority of enterprises of all sizes. Yesterday's debate about public vs. private has transformed into the reality of hybrid cloud: a recent survey shows that 74% of enterprises have a hybrid cloud strategy. Meanwhile, 94% of enterpri...
Connected devices and the industrial internet are growing exponentially every year with Cisco expecting 50 billion devices to be in operation by 2020. In this period of growth, location-based insights are becoming invaluable to many businesses as they adopt new connected technologies. Knowing when and where these devices connect from is critical for a number of scenarios in supply chain management, disaster management, emergency response, M2M, location marketing and more. In his session at @Th...
It is one thing to build single industrial IoT applications, but what will it take to build the Smart Cities and truly society changing applications of the future? The technology won’t be the problem, it will be the number of parties that need to work together and be aligned in their motivation to succeed. In his Day 2 Keynote at @ThingsExpo, Henrik Kenani Dahlgren, Portfolio Marketing Manager at Ericsson, discussed how to plan to cooperate, partner, and form lasting all-star teams to change t...
The cloud market growth today is largely in public clouds. While there is a lot of spend in IT departments in virtualization, these aren’t yet translating into a true “cloud” experience within the enterprise. What is stopping the growth of the “private cloud” market? In his general session at 18th Cloud Expo, Nara Rajagopalan, CEO of Accelerite, explored the challenges in deploying, managing, and getting adoption for a private cloud within an enterprise. What are the key differences between wh...
The 19th International Cloud Expo has announced that its Call for Papers is open. Cloud Expo, to be held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, brings together Cloud Computing, Big Data, Internet of Things, DevOps, Digital Transformation, Microservices and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding business opportuni...
Internet of @ThingsExpo, taking place November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with the 19th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world and ThingsExpo Silicon Valley Call for Papers is now open.
There is little doubt that Big Data solutions will have an increasing role in the Enterprise IT mainstream over time. Big Data at Cloud Expo - to be held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA - has announced its Call for Papers is open. Cloud computing is being adopted in one form or another by 94% of enterprises today. Tens of billions of new devices are being connected to The Internet of Things. And Big Data is driving this bus. An exponential increase is...
In his general session at 18th Cloud Expo, Lee Atchison, Principal Cloud Architect and Advocate at New Relic, discussed cloud as a ‘better data center’ and how it adds new capacity (faster) and improves application availability (redundancy). The cloud is a ‘Dynamic Tool for Dynamic Apps’ and resource allocation is an integral part of your application architecture, so use only the resources you need and allocate /de-allocate resources on the fly.
In his keynote at 18th Cloud Expo, Andrew Keys, Co-Founder of ConsenSys Enterprise, provided an overview of the evolution of the Internet and the Database and the future of their combination – the Blockchain. Andrew Keys is Co-Founder of ConsenSys Enterprise. He comes to ConsenSys Enterprise with capital markets, technology and entrepreneurial experience. Previously, he worked for UBS investment bank in equities analysis. Later, he was responsible for the creation and distribution of life sett...
Machine Learning helps make complex systems more efficient. By applying advanced Machine Learning techniques such as Cognitive Fingerprinting, wind project operators can utilize these tools to learn from collected data, detect regular patterns, and optimize their own operations. In his session at 18th Cloud Expo, Stuart Gillen, Director of Business Development at SparkCognition, discussed how research has demonstrated the value of Machine Learning in delivering next generation analytics to imp...
There are several IoTs: the Industrial Internet, Consumer Wearables, Wearables and Healthcare, Supply Chains, and the movement toward Smart Grids, Cities, Regions, and Nations. There are competing communications standards every step of the way, a bewildering array of sensors and devices, and an entire world of competing data analytics platforms. To some this appears to be chaos. In this power panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, Bradley Holt, Developer Advocate a...
Cognitive Computing is becoming the foundation for a new generation of solutions that have the potential to transform business. Unlike traditional approaches to building solutions, a cognitive computing approach allows the data to help determine the way applications are designed. This contrasts with conventional software development that begins with defining logic based on the current way a business operates. In her session at 18th Cloud Expo, Judith S. Hurwitz, President and CEO of Hurwitz & ...
SYS-CON Events announced today that ReadyTalk, a leading provider of online conferencing and webinar services, has been named Vendor Presentation Sponsor at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. ReadyTalk delivers audio and web conferencing services that inspire collaboration and enable the Future of Work for today’s increasingly digital and mobile workforce. By combining intuitive, innovative tec...
Amazon has gradually rolled out parts of its IoT offerings, but these are just the tip of the iceberg. In addition to optimizing their backend AWS offerings, Amazon is laying the ground work to be a major force in IoT - especially in the connected home and office. In his session at @ThingsExpo, Chris Kocher, founder and managing director of Grey Heron, explained how Amazon is extending its reach to become a major force in IoT by building on its dominant cloud IoT platform, its Dash Button strat...
industrial company for a multi-year contract initially valued at over $4.0 million. In addition to DataV software, Bsquare will also provide comprehensive systems integration, support and maintenance services. DataV leverages advanced data analytics, predictive reasoning, data-driven diagnostics, and automated orchestration of remediation actions in order to improve asset uptime while reducing service and warranty costs.
Vidyo, Inc., has joined the Alliance for Open Media. The Alliance for Open Media is a non-profit organization working to define and develop media technologies that address the need for an open standard for video compression and delivery over the web. As a member of the Alliance, Vidyo will collaborate with industry leaders in pursuit of an open and royalty-free AOMedia Video codec, AV1. Vidyo’s contributions to the organization will bring to bear its long history of expertise in codec technolo...